Used 2010 Dodge Viper 2dr Cpe SRT10 ACR|4,451 Miles|Rear Wheel Drive

The Viper ACR does 0-60 in under four seconds, 0-100 in 11 seconds flat, an 11.5 quarter mile, and over 2.0 peak Gs. The 8.4-liter aluminum V-10 engine that produces a ground-shaking 600 horsepower and tire-smoking 560 lb.-ft. of torque. It features a deep-skirted V10 aluminum engine block, cylinder heads equipped with Computer Numerically Controlled (CNC)-shaped combustion chambers, large valves and Variable Valve Timing (VVT). VVT electronically adjusts when the exhaust valves are open and closed according to engine speed and load, allowing the engine to "breathe" cleaner and The two-piece intake manifold combines cast aluminum lower with smooth runners for better air flow, bolted to a die-cast aluminum upper plenum. A revised air-cleaner box with a low-restriction filter sends air through a dual electronic throttle control into the intake module. The air-fuel mixture in the cylinders is ignited by platinum-tip spark plugs fired by individual plug coils mounted on the cylinder-head covers. Within the cylinders, pistons are quipped with large-diameter floating pins with bronze bushings for high-load capability. Forged powder-metal connecting rods are secured with aircraft-quality fasteners for increased fatigue strength. more efficiently. The Dodge Viper SRT10 ACR is specifically modified and tuned for track performance. The ACR suspension includes coil-over racing dampers from KW Suspensions that are adjustable for damping and ride height. The shocks are two-way adjustable without removing the wheels – a timesaver on the track – and they include a large range for compression and rebound. The KW dampers and forks are machined from solid aluminum billet, feature spherical bearing mounts, and are optimized to minimize weight and maximize performance. A new front stabilizer bar increased roll-stiffness.
Lightweight forged aluminum Sidewinder wheels were optimized by using Finite Element Analysis to achieve a lower rotating unsprung mass. Finished in gloss black paint, they wear Michelin Pilot Sport Cup DOT-approved (street legal) race tires, providing enhanced grip on the track.
Weight-savings were achieved with the Michelin Pilot Sport Cup Tires, Sidewinder lightweight wheels, and StopTech brake rotors. With the aerodynamic and suspension elements, the 2008 Dodge Viper SRT10 ACR is 40 pounds lighter than the Viper SRT10 coupe. The optional Hard Core package further reduces the weight by another 40 pounds, for a total weight savings of 80 pounds.

StopTech two-piece, slotted, lightweight rotors combine with the Viper SRT10's Brembo calipers to reduce rotating inertia and unsprung mass, improve brake cooling, and significantly reduce fade even under extreme conditions. The StopTech rotors feature a patented curved-fin design, a key element in improving brake cooling. The StopTech brake rotors combined with the Michelin Pilot Sport Cup Tires and Sidewinder lightweight wheels combine to reduce 60 pounds of unsprung, rotating mass. The 2008 Dodge SRT10 Viper ACR stops from 60 mph in less than 100 feet.
The Viper ACR does 0-60 in under four seconds, 0-100 in 11 seconds flat, an 11.5 quarter mile, and over 2.0 peak Gs. The 8.4-liter aluminum V-10 engine that produces a ground-shaking 600 horsepower and tire-smoking 560 lb.-ft. of torque. It features a deep-skirted V10 aluminum engine block, cylinder heads equipped with Computer Numerically Controlled (CNC)-shaped combustion chambers, large valves and Variable Valve Timing (VVT). VVT electronically adjusts when the exhaust valves are open and closed according to engine speed and load, allowing the engine to "breathe" cleaner and The two-piece intake manifold combines cast aluminum lower with smooth runners for better air flow, bolted to a die-cast aluminum upper plenum. A revised air-cleaner box with a low-restriction filter sends air through a dual electronic throttle control into the intake module. The air-fuel mixture in the cylinders is ignited by platinum-tip s